Professional Summary

North American Business Development Manager for Biotech/Pharmaceutical,  Sherwin Williams Company, NACE Level 3 Certified Coatings Inspector #8077 with Nuclear Facilities Certification. Director of Sherwin-Williams NQA-1  program which was established and implemented to satisfy the requirements of  10CFR50 Appendix B, 10CFR21, ANSI N45.2, 10CFR50.55 (e), and ASME  NQA-1-1994, Part1 with 1995 Addenda, USNRC Regulatory Guide (RG) 1.28,  revision 3, ASME NQA-1-2004, Part I and applicable portions of NQA-1 Part II,  ASME NQA-1-2008, ASME NQA-1a-2009 Addenda, USNRC Regulatory Guide  1.54, Revision 2, and ANSI N101.4-1972, and D3843-00 (08).

Experience

The Sherwin Williams Company – 1987 to Present– Protective and Marine Division,  Global Finishes Group – services include inspection, specification and troubleshooting of  coatings. Subject matter expertise includes coating system performance and selection,  coating inspection standards, and application. Experienced in most aspects of protective coatings specification, application and troubleshooting with special experience in power  generation, power transmission, pharmaceutical and bridge environments.  

Credentials

NACE Certified Coatings Inspector Level III #8077

NACE Nuclear Facilities Certification  

Sherwin Williams Protective & Marine Coatings Course Instructor

Training

NACE International Coating Inspector Training Program – Level I, II, III & Peer  Review  

NACE Nuclear Power Plant Training for Coating Inspectors

Confined Space Entry Trained

Sherwin Williams Chemical Coatings

Sherwin Williams Protective and Marine Coatings

Titan Spray Equipment Trained – airless

Graco Spray Equipment Trained – airless and plural component

Wiwa Spray Equipment Trained – airless and plural component

Education

James Madison University – Bachelor of Science  

AFFILIATIONS

NACE International – (formerly the National Association of Corrosion Engineers) Former State Treasurer WV Chapter

– TG404 member/author

– TG389 member

– TG441 Vice-chairman

SSPC – Society for Protective Coatings  

ICRI – International Concrete Repair Institute

ASTM –

– D33 Committee voter

– E44 Committee voter

IEEE – Institute of Electrical and Electronics Engineers

ASME – American Society of Mechanical Engineers

NFPA – National Fire Protection Association

ISPE – International Society for Pharmaceutical Engineering

Publications

Durbin, Michael C, Ruth, Kristin – “A New Design for Nuclear Power Plants and Its  Effect on Coating Requirements” – Materials Performance – June 2014

Durbin, Michael C. “Potable Water Polyurea – Overcoming Structural Challenges for a  Successful Lining Installation” – Journal of Protective Coatings and Linings – June 2008